Please review the following to guarantee optimal performance:
Lawn Size: Less than the max mapping size 0.3 ac(13,000 sq ft).
Slope Check: Less than 40% (18 degrees)
Grass Type: No dense Zoysia or St. Augustine grass, and the grass height is below 9 cm(3.5 in).
Terrain: Mostly flat with variations under 3 cm(1.2 in).

Following these steps will help ensure a smooth mowing experience:
Mowing Hours: From half an hour after sunrise to half an hour before sunset.
Grass Height: Keep grass under 9 cm (3.5 in).
Types of Grass: We don't recommend using this product to cut Zoysia or St. Augustine grass.
Slope Check: Ensure slopes are ≤18 degrees; set No-Go Zones for steeper areas.
Clear Obstacles: Remove stones and debris, and fill in any holes or uneven ground.
Wi-Fi Setup: Use a mobile hotspot for initial setup if Wi-Fi coverage is limited. After setup, enable 4G to ensure stable connectivity.
Set No-Go Zones: Mark areas where the mower could get stuck, like pipes or sprinkler heads, and areas not fully covered with grass. Allow low stepping stones.

Placement: Ensure a straight path of at least 5 m in front of the base station.
Map Limit: Each base station supports one map. For more maps, contact eufy support to order additional base stations.
Installation: Secure the base station using nails for lawns or glue for hard surfaces.
Return Mower to Base: Press "Return" and then "OK".

Initial configuration is completed in approximately 5 minutes. The mapping process typically requires 3–4 hours for a standard 0.2 ac (8,712 sq ft) area. Large, complex areas will take longer.

Safe Distance: Avoid edges with obstacles, ditches, or cliffs.
Optimize Edge Cutting: Adjust Danger Zone Detection settings for closer cutting. This may increase mower hazards.
Trimming Near Walls: Grass within 10 cm (4 in) of walls may require manual trimming.
Boundary Grass: Trim grass taller than 9 cm (3.5 in) before mowing.

Grass-Cutting Zone: For full coverage, manually set the grass-cutting zone, especially for yellowed or patchy lawns or manhole covers.
Cutting Height: Gradually lower blade height for tall grass.
Multi-Zone Pathway: Set up a Multi-Zone Pathway if the distance between lawns is ≤60 m.
No-Go Zones: Mark areas where the mower could get stuck.
Boundary Setup: For unclear divisions with neighbors, use physical barriers or set virtual walls after mapping.

100-150 ㎡ (depending on environmental factors)

Yes

Base Station Placement: Keep the charging cable 30 cm (12 in) above ground to prevent water damage.
Software Updates: Regularly update firmware. Update to the latest app and V6 firmware to use the new map splitting and zone management features?

The robot lawn mower's camera has a 96° horizontal field of view (FOV) and an 80° vertical FOV. To ensure safety, please avoid standing in the blind spots on the sides or behind the mower while it is mowing.